Siamo all’aggiornamento di K-Suite 2.33. Da oggi, grazie ai protocolli introdotti per Car, Bike, Truck, Tractor e Boat, potrai lavorare sia via OBD, con KESSv2, che a banco, e quindi direttamente sulla centralina controllo motore, con K-TAG, su moltissimi nuovi veicoli.

La novità più interessante che coinvolge KESSv2 è senza dubbio il protocollo 576 che riguarda le centraline Magneti Marelli 8GMK con Microcontrollore SPC564A80, equipaggiate sulle nuove Abarth: da oggi infatti è possibile lavorare su questi veicoli via OBD2 e quindi non dovrai più smontare e aprire la centralina!

Per K-TAG, nuovi protocolli per microprocessori BDM, Bootloader, JTAG e NEC NBD Toyota. Inoltre, molto importante, da oggi, attraverso la K-Suite, potrai sapere se è possibile “clonare” la centralina con cui devi lavorare: in ogni plugin, ove possibile, avrai questa informazione importante che ti permette di sapere se è possibile copiare i dati di una centralina su di un’altra compatibile dal punto di vista hardware nel caso in cui la centralina originale sia danneggiata o per poter effettuare prove.

Nuovi protocolli | KESSv2

Ssangyong Delphi DCM3.7

KESSv2 – 353
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300KCAN

Ford Continental SID209 CAN

KESSv2 – 572
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300KCAN

VAG Delphi DCM3.7 CAN

KESSv2 – 574
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300KCAN

PSA Delphi DCM6.2 CAN

KESSv2 – 575
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300KCAN

FAL Magneti Marelli 8GMK Micro SPC564A80 CAN

KESSv2 – 576
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300KCAN

Cummins Ingersoll Rand Truck Motorola CM850 CAN

KESSv2 – 571
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300K235

Cummins Mack Truck Recon CM2150E CAN

KESSv2 – 578
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300K235

Cummins Daimler Truck Recon CM2150E CAN

KESSv2 – 579
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300K235

Cummins Peterbilt Truck CM570 CAN

KESSv2 – 580
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300K235

Cummins Generic Truck CM2350B CAN

KESSv2 – 581
– Read: YES
– Write: YES
– Checksum Correction: YES
– Cable: 144300K2355

Nuovi protocolli | K-TAG

FCA Bosch EDC17C49 IROM TC1797

K-TAG – Bootloader Tricore – Prt 363 – Plugin 923
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02
– Connection using the positioning frame: 14P800ADB1, 14P600KT04, 144300T101

VAG Bosch EDC17C54 IROM TC1797 GPT

K-TAG – Bootloader Tricore – Prt 675 – Plugin 918
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02 + 14P600KT06
– Connection using the positioning frame: 14P800ADB1, 14P600KT06, 14P600KT04, 14P600KT03

VAG Bosch MED17.5.20 IROM TC1797 GPT

K-TAG – Bootloader Tricore – Prt 689 – Plugin 916
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02 + 14P600KT06

LDV Bosch EDC17C53 IROM TC1797

K-TAG – Bootloader Tricore – Prt 920 – Plugin 920
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T109

Campi Lie Lamborghini

K-TAG – JTAG Nexus – Prt 869
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T105

Ford Continental 5WY8

K-TAG – JTAG Nexus – Prt 910
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02 + 144300T105

Ssangyong Delphi DCM3.7

K-TAG – JTAG Renesas – Prt 928
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T105 + 144300T104

Nissan Hitachi MEC20

K-TAG – JTAG Renesas – Prt 929
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T104

VAG Delphi DCM3.7 HW I

K-TAG – JTAG Renesas – Prt 389
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T105 + 144300T104

VAG Delphi DCM3.7 HW II

K-TAG – JTAG Renesas – Prt 862
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T105 + 144300T104

GWM Delphi DCM3.7

K-TAG – JTAG Renesas – Prt 931
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T105 + 144300T104

PSA Delphi DCM6.2

K-TAG – JTAG SPC – Prt 930
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T105
– Connection using the positioning frame: 14P800ADB1, 14AM00T06M, 144300T102

Toyota Denso 275136- 2010 | 76F0038AGD

K-TAG – NEC NBD – Prt 913
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 14AS00T08S, 144300T102, 144300T105
– Connection using the positioning frame: 14P800ADB1, 14P600KT02, 14AM00T15M, 144300T102

Toyota Denso 275036 – 3160 | 76F0038AGD

K-TAG – NEC NBD – Prt 932
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 14AS00T09S, 144300T102, 144300T105
– Connection using the positioning frame: 14P800ADB1, 14P600KT02, 14AM00T16M, 144300T102

Toyota Denso 275036 – 7780 | 76F0040GD

K-TAG – NEC NBD – Prt 934
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T110, 14AS00T08S, 144300T102, 144300T105
– Connection using the positioning frame: 14P800ADB1, 14P600KT02, 144300T109, 14AM00T15M, 144300T102

Yamaha Mitsubishi 6MB-8591A-xx

K-TAG – Bootloader Mitsubishi – Prt 933
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02

Toyota Denso 175822-652 | 76F0040GD

K-TAG – NEC NBD – Prt 926
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 14AS00T08S, 144300T102, 144300T105
– Connection using the positioning frame: 14P800ADB1, 14P600KT02, 14AM00T15M, 144300T102

Iveco Bosch EDC17C69 IROM TC1793

K-TAG – Bootloader Tricore – Prt 206 – Plugin 922
– Read: YES
– Write: YES
– Checksum Correction: YES
– Connection using the positioning frame: 14P800ADB1, 14P600KT02, 144300T109, 14P600KT04, 144300T101

Case Bosch EDC17C09 IROM TC1766

K-TAG – Bootloader Tricore – Prt 467 – Plugin 924
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02
– Connection using the positioning frame: 14P800ADB1, 14P600KT04, 144300T101

Iveco Bosch DCU15

K-TAG – Bootloader ST – Prt 915
– Read: YES
– Write: YES
– Checksum Correction: YES
– Direct Connection: 14P600KT02, 144300T105